D-Link Layer 2 Gigabit Managed Long Range PoE+ Switch


Share

The D-Link DGS-F1210-26PS-E is a 24 port Managed Gigabit Switch with 24 10/100/1000 Mbps PoE ports, 2 Gigabit SFP uplink ports. This Switch enables users to easily connect and supply power to PoE-capable devices such as wireless Access Points (APs), IP cameras.

Power Over Ethernet

The DGS-F1210-26PS-E supports both IEEE 802.3at and IEEE 802.3af PoE protocol. With a total PoE budget of 250 watts, allowing users to attach an IEEE 802.3af-compliant device to the DGS-F1210-26PS-E without requiring additional power. PoE is especially suitable for devices that are far from power outlets or when users want to minimize the clutter of extra cables as power is supplied via the Ethernet cables themselves.

Features

Superior connectivity
  • 24 10/10O/1000 Mbps PoE ports
  • 2 Gigabit SFP Ports
  • 250 watts available for PoE
  • Flow control for protection against data loss
  • Maximum distance of 250m

Standards

  • IEEE 802.3 10BASE-T Ethernet (twist-pair copper)
  • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted pair copper)
  • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted pair copper)
  • IEEE 802.3z 1000 BASE-X (fiber-optic)
  • IEEE 802.3af Power over Ethernet
  • IEEE 802.3at Power over Ethernet

Easy to Use

  • Plug-and-play installation
  • IEEE 802.3x Flow Control
  • Auto MDI I MDIX crossover for all ports

Technical Specifications

Technical Specification
General 
Network Interface24 10/100/1000 Mbps PoE RJ45 port (port1~port24)
2Gigabit SFP Ports
Console PortRJ45
DIP SwitchesVLAN, Extend, PoE, QoS
Transmission Rate10/100/1000Mbps Each port supports MDI / MDIX auto-flip and auto-negoation
Network interface: 10BASE-T or 100BASE-TX, 1000 BASE-T Ethernet RJ-45 port
Protocols and StandardsIEEE802.3 10BASE-T
IEEE 802.3u 100BASE-TX
ANSI/IEEE 802.3 NWay auto-negoaon
IEEE802.3ab 1000 BASE-T
– IEEE802.3z 1000 BASE-X – IEEE802.3x Flow Control
– IEEE 802.3af/at standard
Functionality  
Switching Capacity52 Gbps 
Packet Forwarding38.688Mpps 
LED’s IndicatorPower, SYS, LINK/ACT, PoE 
Budget250W 
MAC Address Table8K Entries 
Power100-240VAC, 50-60Hz 
Lightening protection6KV 
Physical  
Physical CharacteristicsDimensions (LxWxH): 440 x 180 x
44mm Weight: 3.2kg
 
Environmental ParameterOperating Temperature: O to 40 °C (32 to 104 °F)
Operating Humidity: 10% to 90% non-condensing
Protocol Standard– IEEE 802.3: Ethernet Media Access Control (MAC) Protocol
– IEEE 802.3i: 10BASE-T Ethernet
– IEEE 802.3u: 100BASE-TX Fast Ethernet
– IEEE 802.3ab: 1000BASE-T Gigabit Ethernet
– IEEE 802.3z: 1000BASE-X Gigabit Ethernet (fiber)
– IEEE 802.3ad: Standard method for performing link aggregation
– IEEE 802.3x: flow control
– IEEE 802.1p: LAN Layer 2 Qos/Cos protocol for traffic priority (multicast filtering)
– IEEE 802.1q: VLAN IEEE 802.1d: STP Spanning tree
– IEEE 802.1s: MSTP Spanning tree
– IEEE 802.1w: RSTP Spanning tree
– IEEE 802.3af 
– IEEE 802.3at
DHCPDHCP Snooping
VLAN– 4K VLAN
– 802.1Q VLAN, MAC VLAN ,IP VLAN
– Voice VLAN
MAC address table– Comply the IEEE 802.1d standard
– MAC address learning and aging automatically
– Stac, dynamic
 – Password protection
– Based on the port number, IP address, MAC address restrictions on user access
– HTTPS, SSL V3, TLS V1, SSH V1/V2
– IP-MAC-PORT ternary binding
Security– IP source protecon, DoS protecon
– DHCP Snooping, DHCP attack protection
– 802.1X, AAA
– Port isolation
– CPU protection
 – POE power limit
POE management– POE chip status view
– PoE port priority
– PoE power supply me period
Access control (ACL)L2 (Layer 2) ~ L4 (Layer 4) packet filtering
Port mirroring, port redirection, flow rate limiting, QoS re-marking
Quality of Service (QoS)Port priority, 802.1p priority, DSCP
priority SP, WRR, WFQ Priority scheduling algorithm
Spanning TreeSTP(IEEE 802.1d), RSTP(IEEE 802.1w) and MSTP(IEEE 802.1s) protocol root bridge protection, TC protection, BPDU protection
MulticastFast leave mechanism
Packet statistics, and unknown multicast discards.
Software Specification 
Link aggregationStatic aggregation
Dynamic aggregation
IP, MAC, and hybrid load balancing modes
Up to 32 aggregaon groups
IPv6IPv6 Ping, IPv6 Tracert, IPv6 Telnet
IPv6 SSH, IPv6 SSL
Management and maintenanceWEB network management (HTTP, HTTPS, SSL V3)
CLI (Telnet, SSH V1/V2, local serial port)
SNMP V1/V2/V3
LLDP, RMON
IP source protection, DoS protection CPU
monitoring, memory monitoring System
log, grading warning
Ping, Tracert detection, cable detection
Order Information 
Part NumberDescription
DGS-F1210-26PS-E26-Port Layer 2 Gigabit Managed Long Range PoE+ Switch with 2 SFP Ports

Switch working mode

Using DIP switch, the working mode of DGS-F1210-26PS-E can be changed

  • Extend Mode: 1-8 ports support 250 meters long-distance power supply (should be use Cat5e or Cat6 cable)
  • VLAN Mode: Isolating ports 1-24 to each other can effectively suppress network storms and improve network performance.
  • QoS Mode: Customize application priority to improve network sensitivity. For example, video priority, monitoring transmissions more smooth.
  • PoE Mode: Automatically detect the power receiving port, find the dead device, power off and restart the devices.


Leave a reply